Polyvinyl Chloride (PVC)

Dec10
by admin on December 10, 2011 at 8:51 pm
Posted In: General

With the development of progress are gaining more and more popular materials used for decoration of office space, which only recently and is not presented as such. Among them we should mention the film, whose production is based on polyvinyl chloride (PVC). Scope of this film is very wide. This is due, above all, its remarkable properties, as rarely any other material can be simultaneously boast durability and frost resistance, durability and heat resistance. So quite successfully pvc transparent film used in construction as a cladding material inner surface of the basin, both for closed and for open structures. This is due to the remarkable stability of PVC film to an aggressive external environment, in particular to the sun.

In addition, the full application of PVC film and found in furniture industry, where it is used for decorating other working surfaces, namely doors, baseboards and other interior elements. In a rural or farm self-adhesive film is used successfully for growing plants, which are buried in the ground. With this technology with a film of PVC creates a greenhouse effect, accelerating the growth of plants. It is the use of such a film allows you to hide and protect the plants from every vagaries of nature. When choosing a film should pay attention to several key indicators showing its quality.

This, above all, transparency, since this dstigaetsya maximum light transmission. For unique PVC film is considered the normal transparency of about 95%. When operating on purpose, for two years, transparency should not fall below 70%, and more than three years, it should not thicken. It is also important has a great strength of PVC film (tensile strength up to 200% elongation at break). The quality is so high that even if the bird would make its claws a hole in the PVC film, they do not become torn otshmetki, and the same and remain, all the same film will retain the overall integrity. The amazing hardiness of the film allow it to maintain its plasticity and flexibility, not pulled down and not become brittle at temperatures down to -35 C. All develops and with the addition of special thermally stabilizing additives and svetostabiliziruyuschih life of PVC film becomes even longer and up to 4 years. Permeability is a very important element, because of him depends on the correct temperature. It takes PVC film and in the rapidly growing sector of advertising services. So recently, one of the most interesting and popular types of outdoor advertising to get its location on automotive and other transportation, as well as to a variety of office and industrial planes, sometimes with enormous dimensions. Through the development of computer and peripheral equipment, there are special devices – engravers. This allows the laser engraver to put on these or other surfaces (skin, cloth, plastic, granite, PVC). Now she was subject to any effects up to create this image of metal, leather and wood structures. With all these advantages, as well as the possibility of using an engraver, PVC film has acquired its second 'breathing' and firms producing it with confidence looking forward, as claimed, it will be a very long time. The technological process of application of PVC film on the surface may be either laminated or vacuum molding.

└ Tags: ,

Manufacturers

Dec01
by admin on December 1, 2011 at 6:50 am
Posted In: General

By the grout should be started after 24 hours. Apply grout recommend a rubber spatula to the area not more than 1,5 – 2 meters at a time in the vertical and horizontal directions. Surplus grout should be removed directing a spatula along the diagonal. After 10-15 minutes, when the grout mixture lightly with a damp sponge podvyalitsya moving on a diagonal walk across the square smoothing carefully removing all the excess. If needed, use the special cleaner acid without forgetting wash it with plenty of water.

When cutting mosaic tesserae is used a special tool – a cutter, ordinary scissors for cutting otdelnyh bands on the net or paper, as well as the cutting device with a diamond disk with a diameter of 10 cm with a continuous crown. The module marked marker cuts of which needs to be done and mosaic cut in several passes to prevent cracking of individual tesserae. Also prienyayut special cutting machine for manual installation of individual pieces – but it applies more to the glazes and stone. Sleuet say a few words for the care of a mosaic. It is recommended to use neutral detergent recommended by the manufacturers. For stubborn dirt, use detergents with low acid content, do not forget to subsequent rinse copiously with water subjected to treatment location. As glass mosaic is mainly used for lining of wet areas and swimming pools it is useful to say a few words about the features of laying mosaic basins.

All that being said, the same thing – it kaksaetsya technology. But before laying out, pay special attention to the waterproofing of the bowl – it should not have even the slightest leak. For this pool is subjected to a static load, ie in for several days kept filled with water. If the place for the pool is open air – it must be protected from rain and direct sunlight. Should be unacceptable accumulation of water on the tiled surfaces for up to 25 days after laying. It is also necessary to comply with temperature control from +5 to +30 C for 12 days from the beginning of laying. It is best to use a mosaic of pools on the paper for a more durable seal applied adhesives. In the case of gold mosaics – that would be the best option for the undulating mosaic floors. For good shvatyvaemosti glue to the surface of the cup the cup, clean the grinding wheel or iron brushes with 5% granular soda and then rinse. Grinding tool is necessary to achieve a perfectly flat surface, which should be covered with corrosion inhibiting. It should also be smooth all the corners and edge radius of 50 mm – if the mosaics on the grid and up to 30 mm – if on paper. When selecting the adhesive, follow the advice of manufacturers. Use only adhesives for swimming pools, not paying attention to the price – remember, that the miser pays twice. Dry extract pool must be at least 20-25 days. You can then safely fill a bowl with water. Reference to the source, plus lots of useful information:.

└ Tags: ,

Computer Aided Translation

Nov16
by admin on November 16, 2011 at 5:40 pm
Posted In: General

Computer-aided translation, or how they are designated in the original computer aided translation to date, used in most of the translation, but also becoming popular among freelance translators. By the above systems include the following: electronic dictionaries, system memory and translation memory (TM), proofing systems and other applications, such as accounting required time needed for translation, statistics documents of different formats and others. It was noted that the use of automated translation efficiency of the interpreter is much higher if we consider the rate of translation, as for quality – on this point there are different opinions. Working with CAT (computer aided translation or automated translation system), the translator often uses the translation memory. This feature enables specialist advantages: – The same pieces of text, the same proposal or even paragraphs (which are often found in technical texts), there is no need to translate every time anew. – If a piece of text contains elements (sentences or phrases translated earlier, you must include the previously translated elements in a new piece of text) – If the translation of a text works by several translators, the text has made a common terminology that certainly simplify the work on the text editor and reduce the time of the project. In summary, if the customer must perform technical translation, or make a translation of the contract, as amended amended, having to make repeated CAT translation of such texts is not necessary.

It would be enough just to open an existing translation memory, and manually correct the modified text. Thus, the translator is not carries twice the same text, but the customer does not pay twice for the translation. To date, there are several programs of automated translation. The most popular ones, are used in many of the translation: it Trados, Deja Vu and Word Fast. Along with them are also using OmegT, Transit, and others. Among other things, such systems are used, for example, in international online auctions such as Ebay (program Olifant), these systems allow participants to communicate auctions of different countries.

└ Tags: ,

Rules For Choosing A Terry Towel

Oct19
by admin on October 19, 2011 at 2:50 pm
Posted In: General

Terry products, these days are not only necessary items for hygiene, but can give pleasant emotions to their masters. Terry towels will help to create a sense of comfort and coziness in the house. But a problem arises, what rules for choosing and buying bath towels, if the store is the variety of choice? Draw attention to some rules that will help you make the right choice. When buying bath towels please attention to the following details. If you want to buy terry towel, ask your question – for what, for what purpose you want to buy terry products. This will help you to understand the huge variety of terry products on the market. The main criteria for selection terry towels often: price, visual quality, tissue density, size towel, design, color scheme, the additional elements.

Distinctive features of quality terry towels are: 1. Be gidroskopichnym. The main objective of towels – good to absorb moisture. This ability to absorb depends on the density. The greater the density of the towels, the best bath towel will absorb the moisture 2.

Just feel the towel – to touch the towel should be soft. Take a towel in hand, take a look. Loop frazzles should be the same length, and do not differ from each other. 3. Smell the towel – the towel should not be strangers, unpleasant odors. 4. Color should lie flat on the entire towel, without streaks. 5. With the growth of technology, manufacturers can offer you original solutions. This may be embroidery, edging, jacquard inset, unusual design, the originality in the details. In this situation, you have to rely only on your taste. The result was a small and simple list of rules that will help you choose the quality towel. This towel will absorb the moisture very well, but it will also give its owner a unique feeling of freshness and softness. Will be every day to care for your skin and give great emotions, who will charge you on a positive day!

└ Tags: , ,

Vacuum Packing Machines

Oct14
by admin on October 14, 2011 at 10:38 pm
Posted In: General

Increasing the shelf life of products in modified atmosphere (IGU), or why you need a vacuum-packaging machines. Packaging technology products in modified atmosphere emerged in the world is not accidental. In 18 century was observed effects of carbon dioxide in the pigmentation of food. Carbon dioxide is kept natural red color of meat and fish for much longer than air. Packaging in modified atmosphere – process of food packaging in inert gases – nitrogen, oxygen and carbon dioxide mixed in strictly defined proportions at a temperature of 0-4? S. In addition, each gas is "responsible" for their particular function in the process packaging, canning and inhibiting bacterial growth by acting as a natural barrier or retaining all the pigmentation of the product is used in vacuum machines.

The main components of food gas mixtures are oxygen, carbon dioxide and nitrogen. Nitrogen – an inert gas is used as 'diluent' mixture (as a means to displace oxygen from the packaging). Nitrogen is poorly soluble in water and fats, has no direct bacteriostatic impact and does not directly affect the stability of the packed product. The use of this gas allows the fullest remove residual oxygen, and thus limit the development of anaerobic bacteria. At higher nitrogen content in the package is easier to maintain a constant concentration of the gas mixture due to the fact that the molecular gas pressure in the container and the air closer to equilibrium. Carbon dioxide (CO2) usually used at a concentration in a mixture of approximately 20%, acts as a bacteriostatic component gas mixture, restraining and suppressing the growth of aerobic bacteria and mold that can develop in the absence of oxygen.

└ Tags: