Then it is necessary to fill another extra frame to get the air gap between the vapor barrier and finish inside. This will no dampening material finishes by condensation. To do this, only a small (1-2 cm) of air prostranstva.V most current homes provides thermal insulation. The most popular solution with mineral wool and polystyrene. These two materials are installed as the outside of the home and inside the multilayer structure of the walls.

Find out what should be the thickness of the insulation of external walls, can be the basis of calculation, which is part of the project. It takes into account all the design features, such as water vapor permeability and thermal conductivity, etc. MINERAL VATAEtot material is made of silica and basalt, and processed material, giving it water-resistant properties. Good vapor permeability makes it such an important feature as environmentally friendly, that is very different from polystyrene mineral wool, and water-repellent treatment compounds reduces their vodopogloshenie. Of mineral wool made solid or semisolid slab density of 80 to 150 kg/m5. They can be as simple or as Solder pads – with a perpendicular arrangement volokon.Lamelevye plates are durable, they have good warm curves uneven surfaces, and a wall of bricks. Schemes for cellular concrete is better to use 2-layer mineral wool, on the one hand, soft, and the other more rigid. She laid a soft side to the wall so densely fill all the bumps at home. The thickness of the layer of insulation on the walls of the facade should be no less than ten centimeters.