Artificial Nails

Apr13
by admin on April 13, 2014 at 1:33 am
Posted In: General

acrylic nails gel nails acrylic nails – the connection of the polymer (powder) and monomer (liquid), which resulted in the formation of a new polymer (in air). Due to the nature formation of length and shape nails acrylic buildup is sometimes also called sculptural. Since the advent of acrylic technology has undergone tremendous changes. Modern materials are different from the previous acrylics generation of its composition, the malicious methyl methacrylate is replaced by safe ethyl methacrylate. As a result, has been eliminated the main drawback of acrylic technology – a traumatic effect on the nails.

The advantages new materials are: high adhesion (adhesion to the nail plate), harmless preparation of the nail to the capacity, flexibility, ease of removal Naroscheny nails. Currently, there are plenty of non-ferrous polymers, as well as color pigments and specialty monomers for monomer, which, combined with the physical properties of acrylic allows you to create not only planar but also voluminous works of art. Gel capacity Nail Gel – light-cured material cures under the influence of the rays of ultraviolet light. Gels are sticky, thick . By function gels can be divided into 3 types. Materials joining surface of natural nails and artificial turf materials designed to simulate the shape and length of the nail material, giving a leak, does not erase the shine naroschenye nail in the various gel technologies, depending on the number of drugs used to perform the above functions that emit one-, two-and three-phase system. Single-phase – one drug acts as a connection, simulation, giving the final form biphasic – two drugs perform the functions above three-phase – each function is performed separately taken the drug

└ Tags:

Tactile Sensors Strip

Apr12
by admin on April 12, 2014 at 5:37 am
Posted In: General

Aircraft designers have always tried to find the best compromise for the aircraft to be built, trying to get maximum performance at high and low airspeeds. Now with material memory components they will be able to do this. The curvature of the leading edge can change to a nice round fat area for slow speeds when Short Take Off and Landing STOL is needed and return to a fine point for the lowest coefficients of drag and optimal cruising speed, a Once in the air. But how do you know when the plane to do this alone. After all, if the wing has material memory based on the heat, then it might be hotter at lower altitudes and less than room temperature (2 degrees per thousand feet) at higher altitudes. However, when moving much faster the friction will heat up the wing, or it may be flying in a thermal inversion as the watershed of Los Angeles, where fog is maintained in the valley. (UCLA when fog clears?) using touch strip on the leading edges of wings, which are shaped memory materials with low speed, once the aircraft has accelerated, there will be more pressure on the leading edge. (We know it better stick insects in aircraft faster and more difficult to clean; When the plane travels through the air faster the air will increase static and static air, can provide power pulse to mind leading edge material to force them to shrink and become thinner.

Thus, the aircraft does not have to compromise wing shape for fast and slow flight. A JSF could land at 60 knots and still fly at 2.3 times the speed of sound. In addition, a UAV can remain lurking in the battlefield for hours after taking off from a short track or a service and then accelerating at a rapid rate and then slow down to speeds of STOL type and then the speed of distance or escape once Complete. The aircraft, which carries the burden rely on STOL capabilities and once in the air should save fuel and increase range efficiency. This system can do all this and more. Today robotics teams have touch sensors so the robots do not crush the subject they are improving, they do this by measuring the pressure on the object. We take this technology and apply it to the forefront of aircraft wings to help us improve and increase performance without compromising the ability of the aircraft for STOL True or higher air speeds (TAS). This will save fuel and increase safety. Think about it.

└ Tags:

VideoSpin Use

Apr11
by admin on April 11, 2014 at 9:33 am
Posted In: General

In order to learn to use Gimp it visits: Open Office Suite of Productivity (Alternative Free for Office de Microsoft) Of this suite Impress used mainly that is the alternative to Microsoft Power Point where I elaborate all class of presentations. In order to learn to use Open Office it visits: Audacity – Free Audio Multiplataforma and Publisher With this program you will be able to register your voice, to integrate music, to mix sounds, to publish audio, to eliminate noise, and everything what you need to manage audio of high quality to integrate in your videos. In order to learn to use Audacity it visits: CamStudio – Software for Screen capture in Video (Screen Capture) (Alternative Free of Camtasia Studio) CamStudio is a utility for Windows that allows to realise the recording of everything what so much happens in your writing-desk, recording the complete screen, as defined windows or zones, as well as the audio one that this assets, even what you record from a microphone, then generating a file in the format of video AVI and using the generator of SWF in format Flash to integrate of simple form in your Web to learn to use CamStudio visit: VideoSpin – Alternative free of Windows Movie Maker VideoSpin it is one program that allows to create your own films in only minutes from your own videos and photos, you will be able to mix together videos, photos and music, to add to titles and transitions and to load archives in the Web in abrir and closing of eyes. In order to learn to use VideoSpin it visits: I altogether use all these tools and creme that can be obtained excellent results if we applied a little creativity..

└ Tags:

Nutrilite

Apr07
by admin on April 7, 2014 at 5:13 pm
Posted In: General

In this post I want to write about the history and evolution of the MLM industry and at the same time the problems that had to suffer by the public. Since the text is something big I decided to divide it into 3 parts, since this way the reading will not be so heavy. I hope you enjoy it. After 60 years of life, since in 1945 Nutrilite implato the first great MLM, there is still considerable confusion in the minds of the general public, which makes it confuse multilevel pyramid fraud with installed. When we started to estudar marketing networks in a serious and technical manner, it amazes us that there is still such a degree of ignorance in our advanced and educated society. But that neither can nor must asombarnos therefore, contrary to what appears is the most natural thing in the world, because there are compelling reasons to do so. The first cause of the ignorance is in the habit.

MLM is a type of very young direct sale, only 60 years, compared with a history of thousands of years of traditional commerce. And in principle, most always wary of what’s new. The Second, is education. US scheduled to have very clear limits that we can not pass ever, except stroke of luck or great wit and wisdom, or by studies and contacts. And those limits have just materializandose in our lives as a sort of prophecy unequivocal and relentless.

Therefore, all those who say that certain things are possible, in principle it is a scammer. the third is in advertising. We are saturated with it, and reject it in all its forms. And the more we promise, more we distrust. MLM and its fantastic possibilities of gain are no stranger to this phenomenon: the majority of people who tell them that they could win one million euros in five years directly considered you a troublemaker.

How To Identify Your Best Prospects

Apr04
by admin on April 4, 2014 at 6:11 am
Posted In: General

In the traditional industry choose the best prospects that can make the work is vital for every company. In the internet industry, the same applies to have a successful organization. Identify the personality of each prospect to determine treatment that everyone must dispense in the process of interviewing and training. It is important to you have a knowledge of the most relevant features and grouped into these categories. In Dominican Republic a major telephone company relate the personalities with images of animals, I am borrowing this idea but with different animals. These features can identify them on your prospects through the type of clothes that use, truck handling, the profession they have, how they walk, how they speak, that kind of music heard or your reading preference.

Compare the figures with animals and birds could be a fun and easy way to identify your prospects and attract them to your organization. The dolphin. They love to draw attention. They are spontaneous and passionate. They love to socialize and make friends easily know. They are enthusiastic and extroverts, love to talk and be central part of the show. It is the kind of people that we always invite you to our holiday and know what is happening in the middle. It’s fun to be with them.

They are ideal to enter the Network Marketing. His enthusiasm is contagious and they easily attract customers and prospects. The way to attract these dolphins within your team is showing part of the glamour and avoid details. They will be more interested in travel, awards that the same compensation plan. The dog. The desire to add value to the community moves this prospectus. They appreciate being valued. They are friends with whom you can tell. They usually have jobs that are focused on helping others. They tend to know listen, make and receive gifts like them.